FOAM LANCE ADJUSTABLE PROFESSIONAL, 1.25MM ORIFICE
For more information or to place the order over the phone, please call 800-786-9274
Contents of the Original Foam Cannon Kit:
- Italian Brass Foam Cannon body
- Italian Calibrated 32 oz White Bottle
- 1/4"" x 9"" tube for drawing chemical
- 3.5 Orifice (1.25mm) installed in the Foamer Body
- 3.0 Orifice (1.1mm) included with kit
- Fitting pack (2-peices) containing a 1/4" M22 adaptor and 1/4" QC Plated Steel Plug
- Manual with care instructions and exploded view
- Min. 1,100 psi - Max. 5,000 psi
- Min. 1.4 gpm - Max. 5.3 gpm
- Max. 140°F
For just under $60, you can go green and save money by conserving up to 90% of your chemicals with Water Cannon’s foam jet injector kit
Whether you are foaming down your car on the weekend or you are a professional contract cleaner washing multiple vehicles per day, this tool will save you time and money. Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired ratio of chemical and you are up and running.
By adjusting the fan blades (narrow or jet), foam cannons throw thick foam onto your vehicle, pole barn siding, house, fence, sidewalk, roof or other washable items. The chemical injection knob on top allows for more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam that is stickier than the chinese knock off foam cannons. In doing so, this thick foam has a longer dwell time which allows the chemical to work on the cleaning surface for longer in its effort to emulsify the dirt and grime. some surfaces may still require some elbow grease, however, if the chemical does its job, very little (if any) scrubbing is required.
Water Cannon’s foam jet injector
is an amazing tool that is both eco-friendly and budget-friendly. When attached to a pressure washer, it can shoot dense foam a distance of more than 20 feet. Since the foam emitted is especially dense, it thoroughly sticks to surfaces, automatically conserving chemical use and protecting the environment in the process. Resultantly, when you use this injector, you get over 20 feet of dense foam projection and detergent suction power as well – even if you’re spraying areas over 30 feet high.
Using the foam injector from Water Cannon
can be six times more effective than simply using wet chemicals. This tool can be used for a broad array of pressure washing purposes, from homeowner
light use to heavy duty industrial applications up to 5,000 PSI with a maximum flow of 5.3 GPM. It effectively coats and dissolves even the most hard to reach dirt and grime from a variety of surfaces.
Download User Manual
The foam jet injector has a fully variable pattern, meaning it gives you the ability to shoot a straight stream or range up to 50 degrees. It also operates with cold or hot water (up to 140° F) pressure washers. To go green and get your green-saving foam injector, visit http://www.watercannon.com/
or call a sales associate at 1-800-333-WASH (9274).
FOAMJET KIT COMPLETE WITH 1/4 INCH QUICK CONNECT VARIABLE PATTERN UP TO 50 DEGREES DENSE FOAM INDUSTRIAL APPLICATION DUTY AND 22mm PLUG,
Warning California Proposition 65
Detectable amount of chemicals known to the State of California to cause cancer, birth defects or other reproductive harm may be found in pressure washing equipment, accessories and exhaust. For More Information Visit www.p65warnings.ca.gov