Blast dirt, grime, slime, mold, mildew, etc. off instantly using the Dirt Killer nozzle. Save chemicals, water, time and money. The Dirt Killer generates a whirlwind of water droplets so powerful that the embedded dirt is blown away. These nozzles, effectively cutting cleaning time in half. The nozzles will fit any pressure washer.
The DK series is the ideal cleaning nozzle. With its unique, high speed spinning head, it gives a less powerful machine the impact of a more powerful industrial pressure washer. The Dirt Killer, unlike some rotary nozzles, leaves no unsightly pressure washing lines on the surface it is cleaning and it is safe for use in sensitive industrial areas. Applications include brick cleaning, kennels, paint and graffiti removal, removal of mildew from stucco, concrete and wood decks. The nozzles can also be used for the removal of gum from sidewalks and boat cleaning with barnacle removal.
By using properly, the Dirt Killer will perform as follows:
At 3000 PSI approximately 250 to 400 hours
At 2000 PSI approximately 300 to 500 hours
At 1000PSI approximately 400 to 700 hours before rebuilding or replacement is necessary
Service advisory: Using a high pressure filter increases the life of the Dirt Killer Nozzle. When using with hot water, it is strongly recommended you use the filter and lubricate the nozzle every 2 to 3 hours with a teflon blended oil. These nozzles work best with pressure regulated unloaders. Do not touch rotating water pattern. Always start with the nozzle pointing towards the ground.
Flow actuated unloaders reduce Dirt Killer Life
Maximum pressure: 3200 PSI
Maximum temperature: 180 Degrees
Inlet thread: 1/4" FPT
IDK-8.0 RED DIRT KILLER NOZZLE 4700PSI - 25Warning California Proposition 65
Detectable amount of chemicals known to the State of California to cause cancer, birth defects or other reproductive harm may be found in pressure washing equipment, accessories and exhaust. For More Information Visit www.p65warnings.ca.gov