10GPM-55PSI-Scaltrol-Hot Water Treatment-HSC50-HSC100

The Scaltrol unit, a dispenser of polyphosphate, provides protection against all mineral scale and staining. The glass reinforced nylon head and housing are designed to handle higher temperature and pressure applications

The Scaltrol unit may be fitted on hot or cold waterlines. Water pressure for effective dispensing of Scaltrol should not exceed 200psi and a check valve may be installed before the Scaltrol unit. Care must be taken to prevent the unit and waterline from freezing. The top of the unit must be fitted in a horizontal position. This will ensure proper dispensing of Scaltrol into the water system.

These glass reinforced nylon Scaltrol units are designed to be used with hot water applications or high pressure applications (up to 200psi) such as dishwashers, booster heaters, steamers and combi-ovens.

Warning California Proposition 65
Detectable amount of chemicals known to the State of California to cause cancer, birth defects or other reproductive harm may be found in pressure washing equipment, accessories and exhaust. For More Information Visit www.p65warnings.ca.gov

Manufacturer:	Scaltrol
SKU:	HSC-100
Variant MPN:	HSC-100