Snub Nose Foam Cannon Kit 14.5005

Snub Nose Foam Cannon Kit has the best of both worlds with the Original Foam Cannon paired with the most popular gun, the M407.  Whether you are foaming down your car on the weekend or you are a professional contract cleaner washing multiple vehicles per day, this tool will save you time and money.  Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired ratio of chemical and you are up and running. The Snub Kit style of cleaning allows you to fit in tight spaces when cleaning and eliminates reaching 40" away to adjust your cannon settings.

The Original Foam Cannon has been market-tested with more than 7 years of proven results. By adjusting the fan blades (narrow or jet) Foam cannons throw thick foam onto your vehicle, pole barn siding, house, fence, sidewalk, roof, or other washable items. The chemical injection knob on top allows for more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam that is stickier than the chinese knock off foam cannons. In doing so, this thick foam has a longer dwell time which allows the chemical to work on the cleaning surface for longer in its effort to emulsify the dirt and grime. some surfaces may still require some elbow grease, however, if the chemical does its job, very little (if any) scrubbing is required.

NOTE To install on certain models of pressure washers such as Greenworks, AR, Ryobi, or Sunjoe, two other fittings are required. See 24.0481 and 24.0448 to adapt to these models. *Note*This Product is only meant to be used with the Foam Cannon. Improper use or installation of a QC nozzle at the Spray Gun outlet is forbidden as this may result in serious harm or injury. For proper use, once you complete your foaming, install an extension lance at the gun inlet for wash down.

• MTM Hydro M407 4000 PSI 7 GPM Spray Gun
• Steel & brass body internals for less wear and tear
• Safety trigger lock flips down to prevent accidental discharge
• Consumer & Professional Grade
• Original MTM Hydro 32 Foam Cannon
• Applies thick detergent over 20 feet away & 30 foot cleaning radius
• Constructed from brass & high grade stainless steel; chemical resistant
• Chemical Injection Knob & Adjustable Spray Pattern
• Increases or decreases the foam output
• Creates a dense foam to remove dirt and grime better

Contents of the Snub Nose Foam Cannon Kit:

• Italian Brass Foam Cannon body
• Italian Calibrated 32 oz White Bottle
• 1/4" x 9" tube for drawing chemical
• 3.5 Orifice (1.25mm) installed in the Foamer Body
• 3.0 Orifice (1.1mm) included with kit
• M407 Spray gun
• 1/4" Male Brass Coupler - Gun Outlet
• 1/4" QC Plated Steel Plug - Cannon Inlet
• 3/8" QC Plated Steel Plug - Gun inlet
• 3/8" M22 (14mm) Plug - Optional Gun inlet fitting
• Teflon Tape for installation - 6 Wraps per fitting
• Manual with care instructions and exploded view

Specs:

• Min. 1,100 psi - Max. 4,000 psi
• Min. 1.4 gpm - Max. 5.3 gpm
• Max. 140°F

California Residents - Click here for Prop 65 WARNINGS

Manufacturer:	Water Cannon
SKU:	14.5005